KEYENCE DV-90 - Manual (Page 181)

8-3
8
E DV-90-IM
Ser
ia
l Comm
unicati
on
8-1 Serial Communication
„ Using the USB
1
Install the USB driver to the PC.
Refer to page 3-13 for the installation procedure for the driver.
2
Set “USB Data Out” in “Verify” to “ON”.
3
The baud rate, data length, parity, and stop bit length are fixed as follows:
4
Specify the “Send Format” in “Verify” according to the software specifications.
( Refer to 6-7)
The default setting is [Data]+ .
Baud rate 115,200 bit/s
Data length 8 bits
Parity Even
Stop bit length 1 bit
Communication protocol No Handshaking
PTS/CTS protocol Do not use
CR