KEYENCE DV-90 User Manual
Page 160
Advertising
7-22
E DV-90-IM
7
How to Use the Setup
So
ftw
a
re
7-4 Sending and Receiving the Settings
• When the DV-90 is connected to the PC via USB
• Interface
: Select “COM**(USB)”.
• Baud Rate
: 115200 bit/s
• Data Length
: 8 bits
• Parity
: Even
• Stop Bit
: 1 bit
* When “COM**(USB)” is selected, the parameters are fixed as shown above.
• When the DV-90 is connected to the PC via RS-232C
• Interface
: Select “COM**”.
• Baud Rate
: 9600 bit/s
• Data Length
: 7 bits
• Parity
: Even
• Stop Bit
: 1 bit
3
Click the [Send] button.
4
Select the “Master record count” to be sent, and click the [OK] button.
To adjust the time set in the DV-90 to match that of the PC, select “Adjust Time on DV-90”.
Advertising