Interlogix Topaz User Manual - Manual (Page 103)

Chapter 5
Control
85
Reset APB Page (Anti-Passback)
The Reset APB page allows you to reset the Anti-Passback status of a cardholder or all cardholders
in a selected Security Area.
Reset APB is used to reset cardholders who have access to the APB Security Area to allow them to
enter that area after they have exited without swiping their cards. For example, if all cardholders who
are in an APB Security Area leave quickly because of a fire and do not swipe their cards individually
upon exiting, the system thinks they are still in the APB area. Reset APB also allows the security
staff to set (change) the Security Area to a different area that is not an APB area for all cardholders
who have access to that area.
To navigate to the Reset APB page, from any page within the Control pages, click the Reset APB
tab button at the top of the screen, or from the main control page click the Reset APB button on the
right side of the screen. The following page displays.
Figure 64.Reset APB page
The Reset APB page contains the following information:
Set All Cardholders Reset cardholders who have exited the APB area without swiping their cards. This allows them
back into the APB area.
Reset ALL Cardholders to
Security Area From the list, click the name of the Security Area that you wish to reset.
Set Selected Cardholders Reset the APB of only one cardholder at a time to a selected Security Area. This allows the
specified cardholder who has access to the APB Security Area to re-enter that area after
exiting the APB area without swiping their card.
Available Cardholders From the list, click the name of the cardholder that you wish to reset
Reset Selected Cardholders
to Security Area From the list, click the Security Area to which you wish to reset the selected cardholder.
Reset APB Allow reentry to the selected Security Area of the selected cardholder or all cardholders.