Interlogix Topaz User Manual - Manual (Page 181)

Chapter 8
Setup
163
Operator Type Page
The Operator Type page allows you to configure, add, and assign 47 different functions to 64 types
of operators. To navigate to the Operator Type page, from any Setup page click the Operators tab
button at the top of the window and then the Op. Type tab button. The following page displays.
Figure 129.Operator Type
The Operator Type page contains the following information:
Operator Types This is a list of Operator Types that has already been configured. To select a
configured operator type from the list, scroll through the list to locate the operator type
you wish to use. Click the Operator Type Name to select. The list of Restricted
functions for the operator type selected appears.
To modify the list and save it as a new operator type, enter a new Operator Type Name
into the field and click Save. See
How to modify an operator type on page 165 for
detailed information on how to modify and save the list.
Operator Type Name Enter the Operator Type Name of up to 16 alphanumeric characters.
Inactivity Timer The Inactivity Time tracks keyboard activity to log off the operator.
When an operator logs on to the system, the timer (if set to a time rather than NONE)
begins counting. Each time the operator uses the keyboard or mouse, the timer resets.
If the timer counts up to the time set in the Inactivity Timer field, the current operator is
logged off the system.
The Inactivity Timer is selectable for each Operator Type independently. The default is
None.