Interlogix Topaz User Manual User Manual
Page 272
Topaz
User Manual
254
Configured Not Found
On the left side, under Not Found, a list of devices displays that the system has a configuration
for but cannot find. Confirm that these devices are no longer installed and physically connected
to the server. It is possible that the device has a communication or other related problem.
If you want any device in this list removed from the database, click it to be highlighted, and then
click Configure.
Note: If you configure a Com port for one device and later unplug it and plug in another
device of a different type, when you run Hardware\Auto Configuration, Auto
Configuration will not find that device. You must reconfigure the device for that Com
port.
CAUTION: If a Com Port is not listed correctly, Auto Configuration won’t find anything under
that Com port.
Right Side of the Page
Color Legend
The corner of the screen displays the color legend, which describes devices listed under the
System icon. These colors provide information about the configuration status of each device.
You can view text boxes describing the meaning of each color by placing your mouse pointer on
a color bar.
Devices shown in green are Found But Not Configured:
Devices shown in red are Configured But Not Found:
Devices shown in black are Found and Configured: