Interlogix Topaz User Manual - Manual (Page 170)

Topaz
User Manual
152
Alarm History Reports Page
The Alarm History Report recalls summarized history reports of alarms and troubles that have
occurred during a specified period of time by alarm point or security area. The report calculates the
following for any alarm in the report:
• Frequency - The number of times the alarm occurred in the time period selected.
• Total Duration - The length of time the alarm point was in alarm for each occurrence and
then the sum total of all those occurrences.
• Longest Duration - The longest time for any single occurrence when the point was in an
alarm condition.
To navigate to Alarm History Reports click the Reports button located in the left browser window or
the corresponding
button. Then click the Alarm Hist. tab button at the top of the browser. The
following page displays.
Figure 123.Alarm History
The Alarm History page contains the following information:
Alarm History This report recalls summarized history reports of alarms and troubles that have occurred during a
specified period of time by alarm point or security area.
Log File Disk Drive Select the drive letter where the history log file is located. The default is the C: drive of your computer.
If the report is being recalled from a removable drive, make sure the removable disk has been
inserted.
Start Date From the drop-down list select the Month, Day, and Year on which the report should start. A full
calendar can be displayed by clicking the Calendar icon.
Note: If you wish to recall all events in the history log file, skip the Start and End Date and Time.
They default to the first and last event in the log file.
Start Time From the drop-down list select the Hour, Minute, and Seconds on which the report should start.