Figure 40. alarm details – Interlogix Topaz User Manual User Manual
Page 57
Chapter 2
Using Topaz
39
Figure 40.Alarm Details
The Alarm Details page contains the following information.
Click ACK to acknowledge the alarm. The name of the operator currently logged on to the system is
recorded in the Acked By field.
Note: The only field on the Alarm Detail page that can be changed or entered at anytime is Comments.
To close the Alarm Details window, click the X in the upper right corner of the window.
Current State
The state of the alarm.
Priority
The priority assigned to the alarm during alarm point setup.
Alarm Type
The alarm type assigned to the alarm during alarm point setup.
Description
The description assigned to the alarm during alarm point setup.
Instructions
The instruction message text assigned during Alarm Option Instructions setup.
Acked By
The name of the operator logged on to the system when the event was
acknowledged.
Alarm Name
The name assigned to the alarm during alarm point setup.
Date/Time
The date and time the alarm event occurred.
Device Name
The name assigned to ACU field panel the point is attached to.
Area
The area assigned to the alarm during alarm point setup.
Comments
Comments typed in by the operator (optional).