Figure 210.device tree – Interlogix Topaz User Manual User Manual
Page 330
Topaz
User Manual
312
Device Tab
Clicking on the Device tab displays the list of field devices (ACUs, etc.) that are currently configured
in the system, as shown below.
Double-clicking on the
device icon or device name expands the device tree as shown below. The
device tree lists all alarm points, readers, and relays that are currently configured in the system for
the device.
Figure 210.Device Tree
The device tree is used to locate the map an icon is currently assigned to, add icons to the maps,
and control the device points. If you click a device name in the tree that is already assigned to a map,
the map it is assigned to displays in the map window and the icon on the map highlights.
Device Point Icons
There are three types of point icons under the
device icon in the device tree.
You can control a point listed in the device tree by clicking on it and the corresponding control
buttons display in the toolbar above the tree. You can then click the desired button to control the
selected device point.