Interlogix Topaz User Manual - Manual (Page 195)

Chapter 8
Setup
177
Custom Fields Page
The Custom Fields page allow you to custom design 11 fields for any data field needed on a
cardholder, in addition to the default fields in the cardholder database. For example, you can add
Address, Emergency Notification, etc.
To navigate to the Custom Fields page, from any Setup page, click the Custom Fld. tab button at
the top of the window, or from the main Setup Page click the Custom Cardholder Field button on
the right side of the screen. The following page displays.
Figure 134.Custom Fields
The Custom Field page contains the following information:
Custom Cardholder Field 1
through 11 Name This page allows you to customize the label/name of these fields as they appear in the
cardholder database. When deciding which label to use for each Custom Field, remember
the maximum size allowed in each field as shown below.
• User Field 1 - 4 can contain a maximum of 24 alphanumeric characters.
• User Field 5 - 7 can contain a maximum of 16 alphanumeric characters.
• User Field 8 - 11 can contain a maximum of 12 alphanumeric characters.
Once the new label/name has been entered on this page, the cardholder information which
fits the custom field, can be entered on the
Custom Fields Page on page 69.
Save Click Save to save the custom field to the cardholder database. A message “Operation
Complete” displays.
Clear At any point if you wish to Clear out all entered information and start over, click Clear.
Note: If Clear is clicked before you click Save, any changes to fields or are lost. Click
another page button and then back on Custom Fld. This redisplays the original
field names that were saved.