Interlogix Topaz User Manual - Manual (Page 327)

Chapter 11
Color Graphics Maps
309
You can also right-click the relay icon to display a menu next to the icon. From the menu you can
select any of the options that are not grayed out. In the following example the options available are
Activate, Toggle, and Pulse.
Click the option you want to select it.
Reader Control Buttons
These buttons control the selected reader.
To change the status of the reader door, right-click the door icon to display a menu next to the icon.
From the menu you can select any of the options that are not grayed out. In the following example
the options available: are Lock, Unlock, and Timed.
Click the option you want to select it.
You can also double-click the reader door icon to have it open (unlock) timed. For example, if you
double-click the door icon, it sends an Open Timed command to the door. At the end of the time cycle
the reader door returns to it’s previous mode.
The open time is the unlock time in seconds that was selected during the reader’s set up.