Interlogix Topaz User Manual - Manual (Page 218)

Topaz
User Manual
200
LAN Communication
The LAN Communication page allows you to configure the LAN Adapters and TCP/IP address.
To navigate to the LAN Communication page from any Hardware page click the LAN Com tab button
in the top navigation bar, or from the main Hardware screen click the LAN Communications button
on the right side of the screen. The following page displays.
Figure 143.LAN Communication
The LAN Communication page contains the following information:
ACU’s Adapter LAN Name Enter a name up to 31 characters
TCP/IP Address Enter the TCP / IP Address for the LAN adapter.
Note: If you are not sure what the TCP / IP address is, you should contact your LAN
Controller. Do not guess or enter a random number
LAN Names A list of previously defined ACU Adapter LAN Names
Save/Add After all changes have been made, click Save.
One of the following messages displays.
• If “Operation Complete” is displayed, then no further changes are needed.
• If “Duplicate Record” is displayed, then the LAN Adapter Name has been repeated.
Use a new name and try again.
• If “Operation Failed” is displayed, then a required field was not entered. Enter the
field and try again.
Delete Click to delete the selected LAN adapter.
CAUTION: Before deleting a LAN adapter, make sure that no field panels are assigned to
the LAN adapter you are deleting.
Clear Clicking Clear at anytime clears changes that have been entered.