Interlogix Topaz User Manual - Manual (Page 219)

Chapter 9
Hardware
201
How to add a new LAN adapter
1. Start by clicking Clear to clear all fields.
2. Enter the LAN Adapter Name.
3. Enter the TCP / IP Address for the LAN adapter.
4. After all fields have been added to the LAN Communication page, click Save/Add. A
message “Operation Complete” displays.
How to modify a LAN adapter
1. Select the LAN Adapter to be modified from the LAN Adapters list by clicking on the name to
highlight it.
2. After making all required modifications to the LAN Adapter Name and/or TCP/IP Address,
click Save/Add. If you change the name, the old LAN Adapter is deleted.
A message “Operation Complete” displays.
How to delete a LAN adapter
1. To delete a LAN Adapter from the System you must first select the LAN Adapter to be
deleted. Do this by clicking on the name of the LAN Adapter in the Configured LAN Adapters
list.
2. After making sure the correct LAN Adapter to be deleted has been selected click Delete.
3. A message “Are you sure you want to delete this record?” displays. Click OK to continue.
The message “Operation Complete” displays.
CAUTION: Before deleting a LAN adapter, make sure that no field panels are assigned to the LAN adapter you are
deleting.