Interlogix Topaz User Manual - Manual (Page 77)

Chapter 4
Cards
59
Security Area Time
Schedule The Security Area Time Schedule defines the times during which the cardholder has access to
certain Security Areas or Access Groups.
Click the name of the area or group, then from the Security Area Time Schedule drop-down list
select the time for authorization. Repeat until all areas or groups have a time schedule.
If the desired Time Schedule is not available and you need to configure one, click the link arrow to
the left of Security Area Time Schedule. This opens the Time Schedule configuration page. Once
you have completed the configuration, close the page by clicking Save. This returns you to the
Access page.
Authorized for
Conditional Unlock This field works in conjunction with readers that are configured to Conditionally Unlock during a
time schedule. When this option is selected, the door does not unlock until a designated
cardholder accesses the area after the start of the unlock Time Schedule.
Example: The lobby reader door is configured to conditionally unlock at 07:00 (7am). At 7 a.m. the
door allows cardholders to access the lobby, but remains locked to Non-Cardholders until a
cardholder that is Authorized for Conditional Unlock accesses the lobby reader.
Save When configuration of the Access Page is complete, click Save to save the cardholder record.
After clicking Save, one of the following messages appears.
• If “Operation Complete” is displayed, then no further changes are needed.
• If “Operation Failed” is displayed, then a required field was not entered. Enter the field and try
again.