Recall alarm events report, Figure 121.recall event: alarm event – Interlogix Topaz User Manual User Manual
Page 167
Chapter 7
Reports
149
Recall Alarm Events Report
The Recall Alarm Events Report recalls all alarm events for a selected time period for all security
areas and all alarm points or a specific security area or alarm point.
To navigate to the Recall Alarm Events Report from within Report pages click the Recall Events
tab button in the top navigation bar and then click the Alarm Event tab button. The following page
displays.
Figure 121.Recall Event: Alarm Event
The Alarm Event page contains the following information:
Recall Alarm Events This report recalls all alarm events for a selected time period for all security areas and all alarm points
or a specific security area or alarm point.
Log File Disk Drive
Select the drive letter where the history log file is located. The default is the C: drive of your computer.
If the report is being recalled from a removable drive, make sure the removable disk has been
inserted.
Start Date
From the drop-down list select the Month, Day, and Year on which the report should start. A full
calendar can be displayed by clicking the
Calendar icon.
Note: If you wish to recall all events in the history log file, skip the Start and End Date and Time.
They default to the first and last event in the log file.
Start Time
From the drop-down list select the Hour, Minute, and Seconds on which the report should start.
Stop Date
From the drop-down list select the Month, Day, and Year on which the report should stop. A full
calendar can be displayed by clicking the Calendar icon.
Stop Time
From the drop-down list select the Hour, Minute, and Seconds on which the report should stop.