Interlogix Topaz User Manual - Manual (Page 222)

Topaz
User Manual
204
Workstation Page
The Workstation page allows you to control how the workstation responds during use. For example,
whether the workstation has photo badging capability, alarm color graphics capability, etc.
To navigate to the Workstation page, click the Workstation tab button in the top navigation bar or
from the main Hardware screen click the Workstation button on the right side of the screen. The
following page displays.
Figure 144.Workstation.
The Workstation page contains the following information:.
Workstation Name The Workstation Name is used to identify a workstation and may have up to 32 characters.
You may have only one (1) workstation on the system and it must have a unique name to
identify it from the server workstation.
Note: It is not recommended that you modify the Workstation Name.
Internet (TCP/IP) Address The server must know the Internet (TCP/IP) Address of the workstation to allow the
workstation to log-on. This TCP/IP address is setup automatically the first time the
Workstation runs the Topaz software. If you are not sure about the TCP/IP address, contact
your Network Administrator.
Note: It is not recommended that you modify the Internet TCP/IP Address.