Installing a host pc server, Figure 11. topaz installation cd – Interlogix Topaz User Manual User Manual
Page 31
Chapter 1
Getting Started
13
8. The program now appears in the Programs and Services section of the Exceptions tab. Make
certain that the check box beside it contains a checkmark. Click OK to close the Firewall
properties.
Installing a Host PC Server
Note: The installation steps for a server are described below. The installation steps for a Workstation are described
under “Hardware”, then “Workstation”, and then “Add a Workstation” elsewhere in this manual.
Make sure you are logged in as the Administrator so you have the correct rights to install software.
Insert the Topaz Installation CD into the CD drive. If Auto Insert Notification is enabled for your CD
drive, the Install Menu provides a list as shown below.
If the Install Menu does not appear within one minute, follow this procedure:
1. Open Windows Explorer.
2. Double-click the drive letter for the CD drive.
3. In the root directory, double-click the file start.bat.
The Topaz Install screen displays.
Note: Before installing Topaz make sure that “Microsoft Internet Explorer 6.0 provided by GE” has been installed
using the Topaz CD and the wizard has been run to complete the installation. If you have IE 6.0 already installed
on your computer check if the title bar states “Microsoft Internet Explorer provided by GE”. If not, you must install
the Virtual Machine that is located on the CD. For more information see
Figure 11.Topaz Installation CD
1. Click Install Topaz to start the installation setup.