Interlogix Topaz User Manual - Manual (Page 278)

Topaz
User Manual
260
How to add a new video recorder
Before configuring the recorders in the Topaz system, they should be installed and functioning
properly. Make certain that you have the TCP/IP address which has been assigned to the recorder
available before you start the setup process.
Note: While many Digital Recorders may use DHCP addressing, Topaz must use Static IP addresses. Be certain when
installing the recorder that a static IP address is assigned to it.
1. Start by clicking Clear to clear any existing data.
2. Enter the data for the new video recorder on the Video Recorder page.
3. Click Save to save the data to the database. The “Operation Complete” message displays. If
“Operation Failed” is displayed, then a required field was not entered. Enter the field and try
again.
How to modify a video recorder
1. Start by selecting the recorder to be modified by scrolling through the Video Recorders list
and clicking on the recorder to select it. After the fields are filled in make sure the correct
recorder to modify has been selected.
2. Make any desired changes to the Video Recorder page.
3. After all changes have been made, click Save/Add. The “Operation Complete” message
displays.
How to delete a video recorder
1. To delete a video recorder from the system you must first select the recorder to be deleted.
Do this by clicking on the name of the recorder in the Video Recorders list.
2. After making sure the correct recorder to be deleted has been selected (highlighted), click
Delete.
3. A message “Are you sure you want to delete this record?” displays. Click OK to continue.
A message “Operation Complete” displays.