Interlogix Topaz User Manual - Manual (Page 179)

Chapter 8
Setup
161
Operators Setup Page
The Operators page allows you to configure up to 256 operators and assign them 47 different
functions.
To navigate to the Operators page, from any Setup page click the Operators tab button at the top of
the page. The following page displays.
Figure 128.Operators
The Operators Setup page contains the following information:
System Operators A list of all configured operators.
Operator Name Enter the Operator Name (name or nickname) of up to 8 alphanumeric characters. The name is not
case sensitive. You may not duplicate an Operator Name.
Password Enter the operator’s Password of up to 6 alphanumeric characters. In place of the characters typed
for the password, “*” display.
Operator Type Select an Operator Type to assign to the Operator Name and Password by clicking on the Type
Name from the drop-down list of operator types.
Note: Click the link arrow to set up additional Operator Types. When setup has been completed,
close the window by clicking Save and continue working in the Operator Setup page.
Show Quickstart at
Login Click to place a check mark in the field to show the QuickStart screens when this operator logs onto
the Topaz system.