Interlogix Topaz User Manual - Manual (Page 274)

Topaz
User Manual
256
You can then make any modifications or deletions. After making changes click Save/Add.
The device tree is automatically updated with the changes you made.
When you navigate to another page, the Device Tree remains in the view you left it.
Note:
• You cannot use the Auto Configuration or standalone Device Tree to add new devices. You
must add them by using the hardware page for the device you wish to add.
• At any time, while on any other page of the Topaz system you can click Device Tree located
in the main tool bar on the left side of the screen to access the standalone device tree
page.