Interlogix Topaz User Manual - Manual (Page 206)

Topaz
User Manual
188
How to configure reader events
1. Select from the list of Event Names by scrolling through the list and clicking on the name of
the event to be configured.
2. Select Yes/No for the following settings:
• Acknowledge
• Display
• Print
• Auto Acknowledge
3. After all events have been set up, click Save. After clicking Save the message “Operation
Complete” displays.
Alarm Options
The Alarm Options setup has two sub-pages that allow you to add Alarm Instructions and define
alarm catagories.
Alarm Instruction Page on page 189
Alarm Categories Page on page 191
To navigate to the Alarm Options pages from any setup page, click the Alarm Opt. tab button at the
top of the window, or from the main Setup page click the Alarm Options button on the right side of
the page. The following page displays.
Figure 137.Alarm Options
The sub-pages are covered in detail on the following pages.