Interlogix Topaz User Manual - Manual (Page 340)

Topaz
User Manual
322
Yellow – A new alarm trouble has been activated that needs to be acknowledged and cleared. The
trouble condition is reported even if the point is masked.
Yellow Flashing – A new alarm trouble has been activated that needs to be acknowledged and
cleared. The trouble condition is reported even if the point is masked.
Note: Because of the versatility of the software, which allows you to configure your own icon, it is possible that the colors
explained above are not the actual colors used. Ask the system administrator if your system has custom
configured icons and confirm your systems icon colors represent the different alarm conditions.
Save your configuration changes by clicking Save Configuration in the center of the toolbar at
the top of your screen.
Note: If you do not save your changes to the configuration, when you exit the program all changes are lost.
Adding Readers to Map
In the Device Tree locate the reader to add. Place the mouse pointer on the Reader icon, click
and hold down the left mouse button while dragging the icon onto the map, and release the mouse
button.
When you release the mouse button it changes to the Reader Locked icon.
If additional custom icon groups have been created for doors (after dragging the reader icon on to
the map and releasing the mouse button), the Icon Groups window is displayed.
Select the icon group you want to use for the reader icon you placed on the map by clicking on the
icon group name.
After you have clicked on the name of a icon group, the four icons configured for the group appears
in the blocks below each of the point designations.
To move the icon to a different location on the map, click and hold the left mouse button on the icon
and drag the icon to a new location on the map.
Note: When placing a new reader point on the map, the icon defaults to a Control Mode type even if the point is in lock
or unlocked mode. When the color graphics is back online, it checks for the current status of the reader door and
change the icon accordingly.