Interlogix Topaz User Manual - Manual (Page 188)

Topaz
User Manual
170
2. Enter the Security Area Name and Security Area Description
3. If the Security Area is associated with devices connected to an ACU panel that
communicates through Dialup, select a Dial-up Panel Name.
4. If the area is controlled by Anti-Passback, select APB Control in Area and Time Delay for
Re-entry.
5. Select Keypad Masking Allowed if you want the cardholder to be allowed to mask alarms.
Masking means that alarms for that area are turned off.
6. If the Security Area uses using the Delayed Alarm Reporting and Masking option, select the
number of seconds that the alarms should wait before reporting the alarm state. This allows
time for the authorized cardholder to mask the alarms.
7. Once all information has been added to the Security Areas page, click Save. A message
“Operation Complete” displays.
How to modify an existing security area
1. From the Security Area list scroll through and select the Security Area to modify by clicking
on the area name to be modified. After a name is selected, the current configuration displays
in the fields on the page.
2. Make any desired changes to the rest of the fields.
3. Click Save.
How to delete a security area
1. From the Security Areas list select the Security Area to delete by clicking on the name. After
a name is selected (highlighted), the current configuration displays in the other fields on the
page.
2. After checking to making sure the correct area is selected click Delete.
3. A message “Are you sure you want to delete this record?” displays. Click OK to continue.
A message “Operation Complete” displays.
CAUTION: Before deleting a security area, remove the area from all cardholders and move all alarms and readers
from the area to be deleted.