Interlogix Topaz User Manual - Manual (Page 311)

Chapter 10
Badge Design
293
Figure 201.Select Printer
Parameters
The Parameters menu selection pops up the Badger Options window and allows you to set the Strip
Bar Code Checksum, and Add CC/FC.
Figure 202.Badger Options
Strip Bar Code Checksum
This option, when selected, stops the checksum portion of the bar code information from printing on
the badge. The option may be selected by clicking on the box to the left of the option placing a check
mark in the box. To de-select the option, click the box again to remove the check mark from the box.