Interlogix Topaz User Manual - Manual (Page 316)

Topaz
User Manual
298
Operating the Map Screen
The map window displays the currently selected map. If there are additional maps assigned to the
color graphics system, they are listed in the map tree in the left window.
To display other maps in the window, select the Maps tab at the top of the Maps / Devices Tree
window. This displays the list of maps that have been added to the color graphics system.
The map tree is a hierarchical list of maps consisting of Overview maps and Detailed maps. Any time
there are maps assigned under an overview, you may need to expand the overview to see the list of
detailed maps under it.
An overview map that is preceded by the sign has additional maps collapsed under it. To see the
list of maps under the overview map, click the in the map tree to expand it, as shown in the
following example.
To view any map in the map window click the map name in the tree.
Map Icons
The icons control different results, depending on the icon type.
The icons on the map represent alarm points, reader doors, relays, security areas, map links, and
cameras. When the mouse pointer is passed over an icon the name of the icon displays in the
bottom left corner of the map window.
Alarm Icons
The interactive map alarm icons change color to show the alarm status in real time.
Green – The alarm is in a normal secure condition and is not masked.
Green Flashing – The alarm has returned to normal condition, but needs to be acknowledged and
cleared.
Red – The alarm has been acknowledged, but has not cleared (reset) yet.
Red Flashing - A new alarm has been activated that needs to be acknowledged and cleared.