Interlogix Topaz User Manual - Manual (Page 81)

Chapter 4
Cards
63
4. To select which photograph is to be used on the badge, move the mouse over the selected
photograph in one of the four photo boxes at the bottom of the screen and click the left mouse
button. This displays the newly selected photo in the Current Photo box above. Click OK to
the left of the Current Photo to save this image into the cardholder database.
5. If you changed any of the video adjustments (Brightness, Contrast, etc.), a dialog box
appears asking you if the new settings should be saved. If you select Yes, these new
adjustments are saved for use with the photo of the next cardholder. If you select No, the
original settings are restored for the next cardholder. With either answer, the photo is saved
to the cardholder database and screen reverts to the Card database screen.
6. At anytime, you can click Cancel and the screen reverts to the Card database screen.
The Configure button allows you to adjust the aspect ratio of the image. Sometimes the
image saved to the badge warps slightly distorting the appearance of the cardholder. If
this happens, you can adjust the aspect using the slider on the pop-up window.
The driver you are using for the cameras appears in the Driver to use drop-down list.
How to import a photo
Importing a photo allows you to display and use a digital photo file instead of a live photo. The
imported photo should not exceed 200k in size.
1. Start by clicking Browse to the right of the Photo File Name field. 
The Choose File window opens.