Interlogix Topaz User Manual User Manual
Page 277
Chapter 9
Hardware
259
The Video Recorder page contains the following information:
Video Recorder Name
The Video Recorder Name field assigns a name to the recorder that can then be selected
on various pages of the Topaz system. This name must be unique and clearly identify the
recorder. It could reference the location of the cameras that it controls. For example:
Administration South or Building 1 West
Internet (TCP/IP) Address
The Internet (TCP/IP) Address field is used to connect the recorder to the LAN and to the
Topaz system. The address must be a static IP. IP addresses should be issued by your IT
department and configured on the recorder before completing this form.
Save/Add
Click Save/Add to save the configuration to the database.
Connect to Video Recorder
Once you have saved the configuration, click the Connect to Video Recorder
button to verify that the correct recorder has been configured.
This button launches the Wave Browser. This browser allows the user to connect to a
video recorder and test the various cameras by viewing live feed from that camera
For information about how to use the Wave Browser, refer to the documentation that
came with your DVMRe