Interlogix Topaz User Manual - Manual (Page 351)

Chapter 11
Color Graphics Maps
333
The Map Link icon on the map changes to a Map Link icon with the link name next to the icon, as in
the following example.
To relocate the icon, click and hold the left mouse button to drag the icon to a new map location.
To delete or remove a map link icon, click and drag the icon back to the tree window and release the
mouse button. The icon disappears from the map and the red check mark on the icon in the tree is
removed.
Save your configuration changes by clicking Save Configuration in the center of the toolbar at
the top of your screen.
Custom ICON Groups
You may create and assign your own group of icons to any alarm, reader, or relay.
Icons must be modified and configured using a bitmap program such as Paint. All Icons should be
saved in the
Topaz\aacgfx color graphics directory on your hard drive. The standard size of icon is
approximately 35 x 35 pixels, but can be any size; however, the larger the icon, the more area of the
map it covers.
Note: You should be familiar with configuring the Color Graphics system before creating and assigning custom icons.
You must be in the configuration mode before you begin. Once in the configuration mode, the Icon
Cfg tab displays in the tree window as shown below. Only the Alarm, Reader, and Relay icons show
and are the only icons you can customize.
Figure 230.Icon Configuration