Interlogix Topaz User Manual - Manual (Page 308)

Topaz
User Manual
290
Encode Mag Stripe
Selecting the Encode Mag Stripe command sets the printer to encode the magnetic strip on the card
with the card number in the standard GE format.
Note: This can only be done if the correct card stock is used, and an approved printer with Magnetic Stripe encoding
option is used with the system.
Invert Badge on Print
Rotates the image 180° when printing the badge.
Note: Rotation is usually required for printing Mag Stripe cards.
Overlaminate Badge
This feature laminates a security hologram on to the card during printing. The printer must support
this feature, such as Eltron P500, Fargo PRO-L, etc. If the selected printer does not support this
feature, the option on the menu list is grayed out.
Reverse Template
When selected this feature prints the selected template on the back of the card. If the printer does
not support double-sided printing the reverse template feature is grayed out in the menu.
Import Bitmaps
A wide range of options is available for inserting Bitmaps into a card, such as logos, designs and
photographs, may be imported into the badge design.
To import a bitmap into a Badger Program, from the Options menu select Import Bitmap. The
following Import Bitmap window displays.