Startup, log-on, & navigating, Startup, Log-on window – Interlogix Topaz User Manual User Manual
Page 46: Startup log-on window, Figure 34. workstation log on window
Topaz
User Manual
28
Startup, Log-on, & Navigating
Startup
After the Topaz software has been properly installed, double-click the Topaz icon on the Windows
desktop to startup the Topaz program.
After a brief initialization period, the log-on window shown below appears on your computer screen.
Log-on Window
Following the System initialization, the Workstation Log-on Window fills the monitor.
Figure 34.Workstation Log on window
To log-on to Topaz, place the mouse pointer in the box labeled Operator ID, click, and type your
Operator ID. Then move the pointer to the box labeled Password. Click and type your password.
Note: If this is a new system you may use the default Operator ID of “master” with no password. Neither the Operator ID
nor the Password is case sensitive. You may change the default password by following the procedures in the
section