Interlogix Topaz User Manual - Manual (Page 120)

Topaz
User Manual
102
Relay Status Page
The Relay Status page allows you to check the status of any configured output relay in the Topaz
system.
To navigate to the Relay Status page click the button next to Output Relay on the main Status
page or click the Relay tab button at the top of the window while in any Status page. The following
page displays.
Figure 73.Relay Status page
To check the status of an output relay, scroll through the list of pre-configured output relays until the
name of the output relay you are looking for appears in the list.
The color of the text for the output relay name shows the status of the relay. The color definitions are
listed below.
Note: The status of relays may also be checked on the Control / Relay page.
If you want to print the contents of the Status window, click Print.
Table 6. Relay Status colors
Color Status
Black De-Energize
Red Energize
(Not shown) Pulse Output