Interlogix Topaz User Manual User Manual
Page 326
Topaz
User Manual
308
Alarm Point Masking Buttons
When an alarm icon is selected on a map by placing the mouse pointer on it, the following buttons
appear in the top left corner of the toolbar.
To mask or unmask the alarm point, right-click the icon to display a menu next to the icon. From the
menu you can select options that are not grayed out. In the following example the only options
available are Mask and Details. If the alarm were configured as a non-maskable alarm point the
Mask option would also be grayed out.
Click the option you want to select it.
You can also double-click the alarm point icon on the map to display the Alarm Detail window.
Relay Control Buttons
Double-clicking the relay icon on the map also toggles the condition of the selected relay. For
example, if the relay is active, when you double-click the icon, it deactivates the relay and vice versa.