Interlogix Topaz User Manual - Manual (Page 305)

Chapter 10
Badge Design
287
File Menu
Figure 194.File menu
During the process of badge design, we recommend that you periodically save the badge template
using the File menu on the Menu Bar at the top of the screen. The first time a template is saved you
must use the Save As command.
To display the File menu, move the mouse pointer to the File menu on the menu bar at the top of the
screen and click the left mouse button. To save a template for the first time, place the mouse pointer
over the Save As command and click the left mouse button. A dialog box appears into which you can
type the name of the template being saved. The template name may be up to eight characters and
no spaces. Once you have selected OK, the system save the template using a TPL suffix.
Once you have initially saved the template using the Save As command, future modifications to the
template can be saved using the Save command from the File menu. Using the Save Command
saves the latest version of the template under its existing filename.
To modify an existing template File Menu, it is first necessary to open the file containing the template.
To do this, you should select the File menu from the menu bar at the top of the screen. Select Open
from the File menu, and then select the required template from the pick list of templates. You may
open a template file by either (1) placing the mouse pointer over the selected template name, and
double-clicking the left mouse button, or by (2) clicking once to highlight the file and then moving the
mouse pointer to OK and again clicking the left mouse button.
• New
• Open
• Save
• Save As...
• Quit