Interlogix Topaz User Manual - Manual (Page 205)

Chapter 8
Setup
187
Reader Event Page
The Reader Event page allows you to select how events related to access attempts are handled.
The selections determine the system's response to a denied or authorized access event. You can
determine whether to Acknowledge, Display, or Print each of the possible access attempts.
For a list of reader events, see Appendix A, Access Code Definitions .
To navigate to the Reader Event page, from any Setup page click the Reader Evnt. tab button at the
top of the window, or from the main Setup page click the Reader Event button on the right side of the
page. The following page displays.
Figure 136.Reader Event
The Reader Event page contains the following information:
Event Name A list of all denied or authorized access event defined in the system. For a complete listing, see
Appendix A,
Access Code Definitions
Acknowledge Select Yes/No if the operator should or should not be required to acknowledge the event when it
occurs.
Display Select Yes/No if the workstation should or should not display the access event when it occurs.
Print Select Yes/No if the events printer should or should not print the access event when it occurs.
Auto Acknowledge If the Auto Acknowledge field is set to Yes, the reader event is displayed in the alarm queue window
and does not require any action by the operator. It clears after a period of time.
Note: The Auto Acknowledge field is not affected by the Acknowledge field.
Save Once all changes have been made to the Reader Event page, click Save.
After clicking Save, the “Operation Complete” messages displays.
Clear At any point if you wish to clear out all entered information and start over, click Clear.