Interlogix Topaz User Manual - Manual (Page 353)

Chapter 11
Color Graphics Maps
335
There are four icons currently assigned to each alarm category: Secure, On, Masked, and Trouble.
Notice the colors match the colors talked about earlier in this document, such as, if the alarm is on
(active) it is flashing red. If you change the icon to an icon with some other color then when the alarm
is on (active) it flashes the new color. This can cause confusion for the operators. It is suggested that
when you modify or create new icons that you keep the colors in mind.
Figure 231.Modify Alarm Icon Group
You must change the icon assigned to each designation (secure, on, masked, trouble) one at a time
by clinking on the icon under the designation name you want to change.
Note: When you are creating a new icon group for a category you should keep each of the four icons the same and only
change the color except for special applications.
For example, to change the Masked icon, click the icon and a disk directory browser window opens.
Locate the icon file you want to assign as the Masked icon as shown on the next page.