Interlogix Topaz User Manual - Manual (Page 341)

Chapter 11
Color Graphics Maps
323
Note: The door icon on the map is grayed out when the panel is offline (not communicating with the server). When
communication is restored it takes 30 seconds for the icons to reflect the current status.
The reader icons with the red check mark on their icon have already been added to the map.
To delete or remove an icon from the map, click and drag the icon back to the tree window and
release the mouse button. The icon disappears and the red check mark on the icon in the tree is
removed.
Save your configuration changes by clicking Save Configuration in the center of the toolbar at
the top of your screen.
Adding Relays to Map
In the Device Tree locate the relay to add. Place the mouse pointer on the relay icon, click and
hold the left mouse button. Drag the icon onto the map and release the mouse button.
When you release the mouse button it defaults to a deactivated relay icon.
Note: When placing a new relay point on the map the icon defaults to a deactivated relay mode type even if the point is
activated. When the color graphics is back online, it checks for the current status of the relay point and change the
icon accordingly.
If additional custom icons groups have been created for doors (after dragging the relay icon on to the
map and releasing the mouse button), the Icon Groups window is displayed.
Select the icon group you want to use for the relay icon you placed on the map by clicking on the icon
group name.
After you have clicked on the name of a icon group, the two icons configured for the group appears in
the blocks below each of the point designations.
To move the icon to a different location on the map click and hold the left mouse button on the icon
and drag the icon to a new location on the map.
Note: The relay icon on the map is grayed out when the panel is offline (not communicating with the server). When
communication is restored it takes 30 seconds for the icons to reflect the current status.
The relay icons with the red check mark on their icon have already been added to a map.
To delete or remove an icon from the map, click and drag the icon back to the tree window and
release the mouse button. The icon disappears and the red check mark on the icon in the tree is
removed.