Artesyn ARTM-831X Installation and Use (June 2014) - Manual (Page 106)

FRU Information and SDR Summary
ARTM-831X Installation and Use (6806800M76E) 106
Depending on the RTM type, either one or 9 SFP Device Inserted sensors are visible. (SFP #2-9
on DS3/OC3 only)
6.3.2 SFP TXFAULT Sensors
There is a digital discrete generic TXFAULT sensor implemented for each SFP inserted.
Assertion Event Mask (Byte 16) 0x00 -
Deassertion Event Mask (Byte 17) 0x00 -
Deassertion Event Mask (Byte 18) 0x00 -
Threshold/Reading Mask (Byte 19) 0x03 -
Threshold/Reading Mask (Byte 20) 0x00 -
Sensor Name SFP #<ID> Ins -
Rearm Mode 1 Auto
Hysteresis Support 0x00 No Hysteresis
Threshold Access Support 0x00 No Thresholds
Event Message Control 0x00 Per Threshold /Discrete State
Reading Definition - -
Table 6-5 SFP Device Inserted Sensor (continued)
Feature Raw Value Description
Table 6-6 SFP TXFAULT Sensor
Feature Raw Value Description
Entity ID 0xC0 PICMG Rear Transition Board
Entity Instance 0x60 -
Sensor Type 0x15/0x1A Board/ Other FRU
Event Reading Type 0x04 Digital Discrete (generic)
Assertion Event Mask (Byte 15) 0x03 -
Assertion Event Mask (Byte 16) 0x00 -
Deassertion Event Mask (Byte 17) 0x00 -