Artesyn ARTM-831X Installation and Use (June 2014) - Manual (Page 232)

TSI FPGA
ARTM-831X Installation and Use (6806800M76E) 232
The module type and functional revision of the module the Fpga is upon . The value is
determined by pull-up/pulldown resistors.
9.5.2.11.6 Synchronisation and Error Monitor Register
Address:
0x1418, SyncErrMonReg
Width: 32 bit
Bit Acronym Type
Description
Default
Pwr Soft
31..
.8 - - reserved undef - -
7...
4 ModuleType R The module type of the module the
Fpga is upon.
0b0000: E1T1, the module is an E1T1
type
0b0001: Ds3, the module is a Ds3 type
0b0010: Oc3, the module is a Oc3 type
0b0011: Ds3Oc3, the module is a
combined Ds3 Oc3 type
0brrrr: reserved const - -
3...
0 ModuleFunctionalRe
v R The module functional revision of the
module the Fpga is upon (e.g. to adapt
the FPGA pinout to a successor module
revision where the pinout has to be
changed)
0b0000: Initial, Initial functional
revision const - -