Artesyn ARTM-831X Installation and Use (June 2014) - Manual (Page 98)

Module Management Controller
ARTM-831X Installation and Use (6806800M76E) 98
The MMC can be upgraded via JTAG or via its IPMB-L interface. To ensure that the payload is not
interrupted during IPMI firmware upgrade, the IPMI controller is storing all operational
information (e-keying, hot-swap state, last events to be queued, graceful shutdown timeout,
latest pin settings) in non-volatile storage.
5.4 Accessing SFP EEPROMs
Memory of SFP EEPROMs can be accessed via MMC with using the IPMI command "Master
Write-Read". Its parameter bus ID need to be set in the following:
5.5 Artesyn OEM Command Set
There are no Artesyn OEM commands defined with the ARTM-831X.
Table 5-1 Bus ID specified for SFP EEPROMs
Bus type Channel number Bus ID
SFP #1 private 0 3
SFP #2 private 0 4
SFP #3 private 0 5
SFP #4 private 0 6
SFP #5 private 0 7
SFP #6 private 1 0
SFP #7 private 1 1
SFP #8 private 1 2
SFP+ private 1 3