Artesyn ARTM-831X Installation and Use (June 2014) - Manual (Page 143)

Base ARTM FPGA
ARTM-831X Installation and Use (6806800M76E) 143
8.3.1.21 10 GE Status interrupt enable
Table 8-45 10 GE Status interrupt enable
Address: 0x16 -x17
Bit Description Default Access
0 Interrupt enable for changed level of Signal N10GE_1_SFP_LOS 0 RTM:
r/w
1 Interrupt enable for changed level of Signal N8707_OPTXENB1 0 RTM:
r/w
2 Interrupt enable for changed level of Signal N8707_LASI_ 0 RTM:
r/w
3 Interrupt enable for changed level of Signal N8707_PCMULK 0 RTM:
r/w
4 Interrupt enable for changed level of Signal GE_LC_RECCLK1 0 RTM:
r/w
5 Interrupt enable for changed level of Signal GE_LC_RECCLK2 0 RTM:
r/w
6 Interrupt enable for changed level of Signal FPGA_ACTIVE_RTM_OUT 0 RTM:
r/w
7 Reserved 0 r
8 Interrupt enable for changed level of Signal SFP_PLUS_TXFAULT 0 RTM:
r/w
9 Interrupt enable for changed level of Signal SFP_PLUS_MOD_ABS 0 RTM:
r/w
10 Interrupt enable for changed level of Signal N8707_PCDRLK 0 RTM:
r/w
11 Interrupt enable for changed level of Signal N8707_PLOSB_ 0 RTM:
r/w
15:12 Reserved 0 r