Artesyn ARTM-831X Installation and Use (June 2014) - Manual (Page 25)

About this Manual
ARTM-831X Installation and Use (6806800M76E) 25
Summary of Changes
Part Number Publication Date Description
6806800M76A July 2011 Preliminary version
6806800M76B October 2011 - Updated Table "Abbreviation" on page 18 , Chapter 1, ARTM-
831X_E1/T1, on page 30 , Chapter 1, ARTM-831X_DS3/OC3, on
page 31 , Chapter 2, Environmental Requirements, on page 38 ,
Chapter 2, RTM Power Specification, on page 39 , Chapter 2,
Installing and Removing the RTM, on page 40 , Chapter 3, LEDs
and Interfaces, on page 55 , Chapter 4, ARTM-831X Base Unit, on
page 66 , and Chapter 8, Unit Description, on page 116 .
- Added Chapter 9, TSI FPGA, on page 157 and Chapter 10, EXT
FPGA, on page 293 .
6806800M76C December 2011 Updated Chapter 4, Block Diagram, on page 61 , ESSI Signals ,
and ESSI Interface and Routing . Added ESF Sync 166Hz Routing .
6806800M76D March 2012 Added a Note in Standard Compliances on page 32 .
Added Notice in sections Installation on page 338 and
Installation on page 342 .
Updated EMC on page 337 and EMV on page 342 .
6806800M76E June 2014 Re- branded to Artesyn template.