Hypertherm MicroEDGE Pro Shape Cutting Control Rev.2 - Manual (Page 103)

Maintenance and diagnostics
MicroEDGE Pro Instruction Manual 807290 4-7
USB test
Conduct this test if the memory stick is not shown as an option when you try to load part programs or update cut charts,
software, or help. Use this test to check all the USB ports: the four on the back and the one on the front of the CNC.
to test the USB port:
1. On the Machine Interface screen, choose a USB port.
2. Follow the instructions on the screen to insert the memory stick in the USB port on the back of the CNC.
3. On the Machine Interface screen, press Test. A message informs you if the test is successful.
4. Repeat the test on the remaining USB ports.
If the test fails on multiple USB ports, contact your OEM or system integrator to replace the motherboard.