Serial communication issues, Usb issues, Cut quality – Hypertherm MicroEDGE Pro Shape Cutting Control Rev.2 User Manual
Page 117: Serial communication issues -21, Usb issues -21, Cut quality -21
Maintenance and diagnostics
MicroEDGE Pro
Instruction Manual 807290
4-21
Symptoms / Indications
Corrective Action
Serial communication issues
• Processes and information
communicated through the
serial ports are not operating
properly
• PS link fail messages are oc-
curring
• Unable to download files over a
configured Serial port
• HPR-link fail messages are
occurring when using serial
communications to the HPR
See the Diagnostics tests section, earlier in this manual.
USB issues
The CNC is not recognizing a
memory stick, mouse, keyboard or
other device in a USB port.
See the Diagnostics tests section, earlier in this manual.
Cut quality
Cut quality, plasma performance,
or both are not as expected.
Choose the “Cutting Tips” button on the main screen and follow the on-screen
instructions to improve cut quality
Contact your table manufacturer for additional troubleshooting.