Hypertherm MicroEDGE Pro Shape Cutting Control Rev.2 - Manual (Page 42)

SpecificationS
1-8 MicroEDGE Pro Instruction Manual 807290
Machine interface configurations
The CNC machine interface is the connection from the CNC to devices on the cutting table to achieve command motion
and to send or receive operational signals (I/O). The selection of a machine interface is based on the total number of
axes (motors) and I/O that you need for your application and that are supported by the CNC software. In addition to the
number of I/O signals required, the style of I/O should be considered to understand what devices and ratings you need
to operate external devices on the table, such as a Cut On signal or lifter station.
HyPath configuration
The HyPath interface is available in multiple configurations. The basic system offers 2 to 4 axes with 24 inputs and
24 outputs. The following table lists configuration options.
Part
Number
Number
of Axes
Number
of I/o
Integrated
Sensor tHC
Wireless Analog
090118 2 24/24 No Yes No
090119 3 24/24 No Yes No
090120 4 24/24 No Yes No
090121 2 24/24 2 Yes Yes
090122 3 24/24 2 Yes Yes
090123 4 24/24 2 Yes Yes
Rear panel of 090123