Hypertherm MicroEDGE Pro Shape Cutting Control Rev.2 - Manual (Page 105)

Maintenance and diagnostics
MicroEDGE Pro Instruction Manual 807290 4-9
5. On the Machine Interface screen, press Test. The screen reports the number of the failed input or output.
6. Contact your OEM or system integrator with the following information:
Picopath:
• Rewire the I/O to a free I/O point and reassign the I/O function in the Phoenix software.
HyPath:
• If an input has failed, rewire the input to a free input point, then reassign the input function in the Phoenix software.
• If an output has failed, you can remove a relay from a spare output and swap it with the relay at the failed output. No
rewiring is required.