Hypertherm MicroEDGE Pro Shape Cutting Control Rev.2 - Manual (Page 77)

InstallatIon
MicroEDGE Pro Instruction Manual 807290 2-29
joystick and speedpot connector
• Cable connector: AMP 206037-1
• Pin contacts AMP 65105-3
• Cabling: Belden # 8308 or equivalent for encoder signals
• Hypertherm kit: 228837
Pin-outs for joystick and speedpot connector
Pin no. Signal
1 Joystick up
2 Joystick down
3 Joystick left
4 Joystick right
5 Common
6 10 V reference
7 Speed pot 1+
8 Speed pot 1-
9 Common
10 10 V reference
11 Speed pot 2+
12 Speed pot 2-
13 Common
14 Common
15 Common
16 Common