Hypertherm MicroEDGE Pro Shape Cutting Control Rev.2 - Manual (Page 99)

Maintenance and diagnostics
MicroEDGE Pro Instruction Manual 807290 4-3
DANgER
ELECtRIC SHoCk CAN kILL
Disconnect electrical power before performing any maintenance.
See the Safety section in this manual for more safety precautions.
Introduction
Hypertherm assumes that the service personnel who perform troubleshooting testing are high-level
electronic service technicians who have worked with high-voltage electro-mechanical systems. Knowledge
of final isolation troubleshooting techniques is also assumed.
In addition to being technically qualified, maintenance personnel must perform all testing with safety in mind. For more
information, refer to the Safety section for operating precautions and warning formats.