Hypertherm MicroEDGE Pro Shape Cutting Control Rev.2 - Manual (Page 53)

InstallatIon
MicroEDGE Pro Instruction Manual 807290 2-5
x and y axis configuration
To configure the X and Y axes, first decide which axis on the table will be the X axis and where the home position will be.
Next, define the X/Y orientation and home position in Phoenix software to match the configuration you want on the table.
The definition of the axes orientation and home position in software and on the table must agree so the system can
execute the part programs as expected.
Example of a shape cutting system configured with an MicroEDgE Pro CNC
x+
x–
y+
y–
typical table origin and
Home position (0,0)