Hypertherm MicroEDGE Pro Shape Cutting Control Rev.2 - Manual (Page 91)

OperatiOn
MicroEDGE Pro Instruction Manual 807290 3-3
Screen navigation
The keys located at the bottom of the screen in the software are called soft keys. The soft keys correspond to function
keys on a PC keyboard. OK and Cancel soft keys let you save or cancel changes that you make in a screen.
Refer to the Phoenix Software Operator’s Manual for more details.
Phoenix Main screen
Note: The features shown on each screen vary depending on the user level (Beginner, Intermediate, or Advanced) and
the features enabled on the Special Setups and Station Configuration screens. This manual assumes the CNC
is in Advanced Mode and shows all features with an example machine configuration.