Hypertherm MicroEDGE Pro Shape Cutting Control Rev.2 - Manual (Page 86)

InstallatIon
2-38 MicroEDGE Pro Instruction Manual 807290
Mapping a network drive
Phoenix requires a network drive to be defined in Windows. After you define the network drive, you can add it as a folder
in Phoenix.
Before you begin, connect a USB keyboard to the MicroEDGE Pro.
1. Press Alt+F4 to exit the Phoenix software.
2. Choose Start Menu>Windows Explorer>Tools>Map Network Drive.
3. Choose a drive letter, then the folder. Make note of the folder path. When you connect to the folder in Phoenix, you
will need to enter the folder path.
4. Choose Reconnect at Logon.
5. Choose Finish to save the mapped network drive.