Hypertherm MicroEDGE Pro Shape Cutting Control Rev.2 - Manual (Page 73)

InstallatIon
MicroEDGE Pro Instruction Manual 807290 2-25
HyPath 4-axis servo connectors
The HyPath 4-axis servo PCB provides the drive and encoder connections for up to 4 independent servo axes.
The board provides two circular connectors. Each connector provides connections for two independent servo axes.
Axis assignments are made in Phoenix software on the Axes screen. For more information, see the Phoenix Software
Installation and Setup Manual.
HyPath servo connector
Use the following information to create HyPath servo cables.
The HyPath servo connector is a 37-pin, circular connector:
• Cable connector: AMP 206150-1
• Socket contacts: AMP 164164 (16–18 AWG), AMP 164163 (20–24 AWG)
• Hypertherm kit: 228491
Location of the 4-axis servo connectors
HyPath servo
connectors
j3 Axes 1-2
j4 Axes 3-4